ENHANCEMENTS
- Provides GSM Firmware version 541e Update, which:
- Supports 64-KB Subscriber Identity Module (SIM) cards.
- Supports Cell Notification on Ericsson Serving GPRS Support Node (SGSN).
- Provides Wireless LAN Driver build 63, which:
- Supports third-party intermediate Wireless LAN driver.
- Improves reception and roaming.
- Extends the maximum length of lightweight extensible authentication protocol (LEAP) username and password to 63 characters.
- Provides Bluetooth Software version 1.0.0.3701, which:
- Improves headset compatibility.
- Improves headset reconnection when returning into service area.
- Adds support for Siemens car adapter kit.
- Enables pairing using 16-character PIN code.
- Adds a check to determine if Bluetooth stack is initialized before accepting messages from phone.
- Adds a user interface (UI) change to enable a connected headset to automatically disconnect before attempting to connect to a different headset when the user chooses to connect to a second headset.
FIXES
- Provides GSM Firmware version 541e Update, which fixes an issue where dual-tone multi-frequency (DTMF) did not work with interactive voice response (IVR) systems.
- Provides Wireless LAN Driver build 63, which fixes the following issues:
- Fixes issue that occurred with tunneled transport layer security (TTLS) server certificate validation.
- Fixes unrecognizable characters that are displayed during login when using TTLS with MS-CHAP2.
- Fixes LEAP authentication to redisplay login prompt after tapping Cancel.
- Changes display name to "HP iPAQ Wi-Fi Wireless Adapter."
- Fixes issue with TCP/IP rebinding that occurs after a suspend/resume when using AnthaVPN.
- Fixes issue with automatic authentication during roaming.
- Fixes issue with "memory leakage" when handheld is roaming.
- Fixes issue where handheld will not enter Sleep mode while roaming.
- Fixes issue where roaming fails due to an incorrect BSSID list.
- Bluetooth build 1.0.0.3701, which fixes the following issues:
- Fixes inaccurate display of headset icon when a call is in progress.
- Fixes check for invalid device name.
- Fixes issue where handheld could not reconnect to remote device after a page timeout.
- Fixes Object push profile update so it sends all files.
- Updates FTP connection wizard to correct service discovery issue.
- Fixes issue with call waiting for incoming call handling while dialing out.
- Fixes issue with headset connection icon so it is correctly displayed after power cycling.
- Fixes audio to make it compatible with an in-car solution.
- Provides fixes for the following audio issues:
- Fixes issue where the volume becomes louder if the iPAQ Audio "default" button is tapped when a Bluetooth Headset is connected to the handheld.
- Fixes issue with the status in the Radio Interface Layer (RIL) driver when a Bluetooth Headset is connected.
- Fixes audio issue where the right channel for a headset was unavailable for playing audio and during calls.
Ostatnio są jakieś problemy z dotarciem do strony poświęconej temu modelowi PDA HP, dlatego też zamieszczamy po prostu bezpośredni link do pliku z update'em oraz do pliku readme. Pamiętajcie, że z instalacją nowego systemu wiąże się konieczność wykonania twardego resetu. Skasowaniu może ulec również obszar File Store. Odtwarzanie backupu wykonanego na poprzedniej wersji okienek nie jest zalecane.
Cynk nadesłał Irwin
ROM v1.11 dla h6340
Na witrynie HP pojawił się nowy ROM dla palmtopo-telefonów HP iPAQ serii h6340, z angielską wersją mobilnych okienek. Lista poprawek i zmian jest tak obszerna, że chyba nie ma się co zastanawiać - warto wykonać upgrade. Miejmy nadzieję, że rozwiąże on większość problemów, z którymi borykają się użytkownicy tego PDA z obecną wersją systemu. Oto szczegółowe zestawienie wszystkich zmian - jako że jest ich tak wiele, pozwoliłem sobie tego nie tłumaczyć:
Tag :
