NoDo według zapowiedzi oferuje upragnione copy & paste - funkcjonalność, bez której użytkownicy szczególnie przyzwyczajeni do poprzedniej wersji systemu nie mogli sobie poradzić. Obraz ROMu można zastosować w HTC Mozart. Szczegółowy opis instalacji poniżej lub na stronach xda-dev. Za cynk dziękujemy gbbsoft
Procedura aktualizacji do NoDo.
Step 1: Download 1.09 ROM, 1.30 & ModelID – Links posted below
Step 2: Extract the 1.09 ROM to a folder, let’s name it 109
Step 3: Extract the 1.30 ROM to a folder, let’s name it 130. Use WinRar to extract the 1.30 rom’s exe file – right click on the file and then look for extract entries of winrar
Step 4: Extract ModelID.fig from ModelID.zip and place it into the 130 folder.
Step 5: Reboot your Mozart Phone to Bootloader mode (Switch off then hold Vol. Down and Switch on. Release Vol Down when u see rainbow background)
Step 6: Connect your Mozart Phone to the PC and wait for the Drivers to be installed. You should see USB written on your Phone.
Step 7: Go to 109 Folder and start ROMUpdateUtility.exe
Step 8: Go through it with next, next, etc. Let your Phone upgrade the firmware. After it gets to 100% Phone reboots to Bootloader Mode itself (and ROMUpdateUtility.exe states an error, but well, it seems this error wont bother us).
Step 9: Go to 130 Folder and start ROMUpdateUtility.exe
Step 10: Go through it with next, next, etc. Let your Phone upgrade the firmware. After it gets to 100% you are done.